Wiring Harness Pioneer DEQ7600

[VXD959]

Please see pics. Top is the headunit, below is the EQ. I have the harness for the headunit, but I don't have whatever connects where the 4 pins are in the EQ (lower right). Do I need a harness for the EQ?

I'm not familiar with the RCA connections. I guess the two RCA outputs from the headunit go to the EQ RCA connections. But how do I power up the EQ? Seems to me that I need the harness. Please advise and sorry for the naive questions. Last time I installed a unit was "wire-to-wire".

Thanks

[Triathlete]

That doesn't look like a plug to me. Not sure what it is.

[MZ-N10]

looks like a molex connector off a pc...if u know which lines is which on tat u might wanna just splice a molex into it.

[kpaske]

Yeah, that looks like a molex to me too. There should be connections for ground, ignition power, and constant power. You'd need a wiring diagram if you wanted to make your own.

I checked e-bay which is usually good for stuff like that, but didn't see anything right away. Your best bet at this point is to probably contact Pioneer directly and order the part. http://parts.pioneerelectronics.com/

[Tone]

You're going to need to go to Pioneer for that - we have people come in all the time with radios they gotten 'somewhere' that don't have the plug/wiring coming out and there are soooooo many differences even within brands. Good luck.

[VXD959]

Thank you all. I will call Pioneer for the part. I got the equalizer from Ebay
($60 shipped). I think it was an excellent deal (assuming that the EQ is working fine, as promised by the seller).

Regards,