Took the valve off, no problem, although the valve itself apart, I wasn't to sure on, so I just blew cleaner in the hole a bunch of times. As for the manifold that the valve bolts to I tried to plug the big hole but it just blew the rag out each time I tried. So I finally decided to just spray cleaner down both holes, I used about 3/4 of a can, and start her up, then spray, start etc... I reset the computer, the light was off for a matter of minutes and then popped back on. I know for sure thats the code and the only code since I had it checked yesterday. So, did I not clean the thing well enough, Can you clean Both holes with the car running, whats the best way to do this? There was plenty of exhaust coming out of the big hole, so not sure if thats the prob, maybe like Tone said, its the tube that goes to the throttle body. Also tone, whats the best way to take the Throttle body apart without breaking anything, Are there jsut 4 bolts holding it on? How complicated is it?

thanks,
Randon