Dumb question...

[nfpgasmask]

Hmm, screws on the back end?

If they are like my 99's 16ers they have screws that hold them.

[Triathlete]

Nope they are right on the front! Between the lugs.

[Triathlete]

Just looked in the gallery...18's are differant. Someone with 18's pipe in here!

[Anita]

The cap is secured with 3 2-inch screws that are fitted through the spare and screwed into the back of the cap.

[thedutchguy]

The cap is secured with 3 2-inch screws that are fitted through the spare and screwed into the back of the cap.

meaning you have to take of the wheels to remove the caps!

[nfpgasmask]

OK thanks! That's what I concluded too, but I just wanted to make sure there was not another way before I pull all my wheels off!

I'm in the process of finishing my total de-badge and I have a simple plan for the center caps. But I am ordering new rims and tires next month so I will just wait until then to do it.

Thanks - Bart

[creeg]

If you want to go for the absolutely simplest way to debadge, someone had sugggested that you get 4 round 3 or 4-inch bubble-type mirrors, and just stick one on each center cap.

I did it, and it looks way better than having "Isuzu" there. Yes, its kinda ghetto, but it doesnt take a lot of effort, and it adds a bit more shine to the wheels...