Quote Originally Posted by k4tmc
Some "before" (stock) and "after" detailed photos would be good. I have the problem with both windows and need to fix them, but I hesitate to start without knowing exactly what I need to do.
I do not want to turn this into a project that takes days to complete, i.e., driving around with the door panels off.
Slotting the holes and adding washers, taking the panel off and putting it back.
Only takes about an hour maybe two.
If you have broken window tabs, it might take longer to mix up some epoxy.
Don't be afraid to use alot to encapsulate the entire break.
Leave the window up for a day before trying to lower,(cure time) but you can still put the panel back on.