Quote Originally Posted by creeg
The new tab causes the window to not completely recess into the window. About 1/4 inch of the window sticks out. Not a big deal to me, but worth noting.
Huh? Can you take a picture or explain what you mean a little better?

Edit: I think what you mean is that when the window is rolled down completely, it still sticks up about 1/4" out of the door. Right?

The 3m nozzles are one-time use, but the tube of adhesive cliams that if you close it back up, you can use it again later. (you get about 10 nozzles in a pack)
Surely there has to be another suitable adhesive or method of application. $78 is a bit stiff for glue!

Quote Originally Posted by Kenny
When putting on new tabs, would it be a good time to maybe place the foreward tab a bit lower to give the window that much needed tilt?? Is there enough meat on this clip to allow this? or a homemade clip...
This is what I'm wondering. From what other owners have said in other threads, it seems the source of the problem is where these tabs are positioned on the glass. A bit of a correction when installing the replacement tabs might solve the binding issue once and for all.