no more EGR ??

[mbeach]

Clean it out and see...
There's a dozen reasons why you could be running lean -a stuck (open) EGR would only be one of them. How's it run at cruising speed?


It looks like you are looking for some (musical) gigs -what do you play? I used to be a (fairly) well-respected bouncer at the Frog, Bear and Wild Boar Bar -maybe I could call the guys and put in a word for you..?

[thedutchguy]

don't forget that the egr is there for reducing nox in your exhaust gasses by reducing your combustion temperature!

[bulldog]

that would be awesome if i could play there,,ive already played at Kafe Kerouac and Thirsty Ear here in columbus,,i used to play all over Dayton and other places,, just trying to break into the market here,,thanks mbeach I would appreciate that,,,if you can give me an email address that would be even better and then i can forward my electronic press kit to them www.sonicbids.com/darrenjones

at cruising speed it runs fine thats why i cant figure it out and ive already cleaned the egr

[mbeach]

The FBWB's GM is now part owner of the Skyy Bar (his name is Dave Allsbrooks). I don't know who took over his position, but it's likely to be someone who's been there for awhile. There are 3 owners, but they have little to do with talent selection. They are all good people. If you get in with that crowd, all of Columbus is open to you...
The bar hired a new marketing guy (despite the fact that two of their employees/bartenders have marketing degrees) -he's a tool, and responsible for bringing B. Honest into the club on my last night (a year ago). They (B. Honest) honestly sucked. He might've been let go since then...
Go to frogbearbar.com for instructions on how to submit a demo tape. They might be able to slot you in a solo night (maybe a Wednesday) on the patio.
Find out who will be reviewing your tape and let me know who it is. I've been meaning to call those guys (and girls mmmmm.... the girls....) and say hello.
Either way, tell anyone/everyone that I (Marlon Beach) recommended you -tell them how you know me, and how to get in touch with me. It's a good place to work, and there's surprisingly little turnover considering the business. Someone is bound to remember me.
They get literally hundreds of submissions a month -you have to stand out or know someone to get in.

As for your EGR, I'm stumped.

[-x-]

my egr either went bad or got stuck and threw a code. after a healthy tune up i realized that the egr was the main cause of my horrific idleing, seeing as to how i didnt have 150-180 buck laying around but i did have a metal plate i decided to block off the egr = ) man does it run smooth. I AM NOT SAYING IT IS GOOD FOR THE ENGINE but it does get up to speed VERY smoothly more so than before i have been planning to unblock it again and see if it was jus stuck but yea that the long and short of it its been about a month now still running strong yes the code stays on no i have checked to veify its only the egr code throwing the check engin light, hmmm maybe something to do this weekend on top of the other 500 things to do on my limited time off ; )

[mbeach]

So from your description, it sounds like your EGR was stuck open -it was recirculating exhaust gasses at idle (bad).

Does someone sell and EGR rebuild kit if your EGR valve is too far gone to simply clean?

[Jolly Roger VX'er]

correct me if I'm wrong; but, couldn't one if one so desired block off the egr where the inlet pipe bolts up to the engine (exhaust). Also, one could use the egr gasket as a template and make a tin blocking plate to be placed directly under the egr itself.

this would not only block the egr from functioning, but also leave it in place for show (where visual inspection dictates a egr to be seen) and leave the electrical harness connected so that a check engine light wouldn't be on for a disconnected harness?

****not condoning this act nor have I tried it myself...just bored and doing waaaaay to much devious thinking.

****also not sure what effect higher cylinder temps would have on oil usage for your particular engine!

The thoughts of a Supercharged engine w/cold air intake providing a completely fresh air/fuel mixture to the cylinders devoid of reburnt exhaust sounds yummie!

[Spyder]

Two bolts take the egr off.
You can take it off clean it and have it back on in about 30 min.
My egr gave me trouble, I cleaned it and it fixed the problem.
But...It started doing the same thing a few months later and I ended up just replacing it.

[Jolly Roger VX'er]

correct me if I'm wrong; but, couldn't one if one so desired block off the egr where the inlet pipe bolts up to the engine (exhaust). Also, one could use the egr gasket as a template and make a tin blocking plate to be placed directly under the egr itself.

this would not only block the egr from functioning, but also leave it in place for show (where visual inspection dictates a egr to be seen) and leave the electrical harness connected so that a check engine light wouldn't be on for a disconnected harness?

****not condoning this act nor have I tried it myself...just bored and doing waaaaay to much devious thinking.

****also not sure what effect higher cylinder temps would have on oil usage for your particular engine!

The thoughts of a Supercharged engine w/cold air intake providing a completely fresh air/fuel mixture to the cylinders devoid of reburnt exhaust sounds yummie!

Was 300 miles away from doing the usual remove EGR & clean carbon when I got the ole check engine light for the EGR. Removed..cleaned it out with Sea Foam....and said what the heck...made a blocking plate out of a wall cover switch plate from Lowe's for $1.69 and voila...runs like a rape date! No more exhaust smothering these Supercharged cylinders!