Quote Originally Posted by Jolly Roger VX'er View Post
I had a spare EGR gasket and just used it as a template on a wall switch cover plate using a sharpie black marker....cut out with tin snips..used a dremel to deburr...center punched & drilled out the two bolt holes and voila. I left the EGR gasket stuck to the base of the EGR and reinserted the two bolts..then slid the blocking plate over the bolts & put the extra EGR gasket (came with Supercharger IIRC) under plate and then set entire assembly back on mounting face...tightened bolts. Easy job and completely reversible if need be.
I guess that will make sense if I have my EGR in my hand...