That's a greayt idea! I've been using a bolt with a wing nut for my quick release seat option. I'll be switching over tomorrow!
Peace.
Tom
012009
Super VXer
That's a greayt idea! I've been using a bolt with a wing nut for my quick release seat option. I'll be switching over tomorrow!
Peace.
Tom
012009
Last edited by tomdietrying : 06/16/2008 at 04:02 PM
"Through Great Sacrifice..... Great Rewards Will Be Achieved"
Super VXer
I used the removable pin tip about a year ago, when I first saw it.
The pins are a perfect dia. easy to use, I might silacone the bushings in to keep them in place, but with two kids, I never get to take it out
Sometimes I Wonder......
Why Is That Frizbee Getting Bigger?
Then It Hits Me
Super VXer
I am about to do this quick mod to my VX and had a question.
Is there any concern about lack of strength when swapping these pins?
Super VXer
Those pins should be plenty strong. Most of the strength (in case of an accident) comes from the rear latch anyway. The front is primarily for stabalization & the hinge.
[SIGPIC][/SIGPIC]
Put a smiley after you say that Bub.
Super VXer
Since the quick-pins are the same diameter as the OEM pins, there shouldn't be any loss of strength.But yeah, I have had those pins in there for more than 3 years with no issue.
Sent from my "two hands on a keyboard"
Posting Permissions
Reply With Quote
