Back-ordered OEM parts

[VCAMILO]

I had to wait 2 months to get my VX back last year from the dealer. I bent the rear axle and they had to put one together from parts... I was driving around my GF's new volvo so I wasnt complaining... But when i got my VX back it felt like a new car. :-) I was allowed to order to yakima rack a few weeks back and they told me that it was shipping from Japan. Lets see if i get it...

[VehiGAZ]

Thanks for the suggestions!

I didn't try Merlin, but I will. I also e-mailed Jerry, too.

So our diffy is the same as a TOD Trooper's, huh? I suspected as much, but didn't know for sure. When different models share parts, do they share part numbers, too?

[Locomigo]

yep.

Essentially the VX is a SWB Trooper. Same motor/trans/tcase/axles/suspension/frame. The interior (dash) comes from the 97 Rodeo iteration.
The body is unique to the VX.

[Maugan_VX]

I wouldn't want trooper suspension parts in my VX! :P

Also, I've read it to be the case that our half-axles are different than the troopers.

I thought our rear diff was different than the troopers as well, as we had the LSD and they didn't.

[Locomigo]

sure they do.

The 12 bolt LSD rear axle, same as all the japanese produced imported vehicles (Trooper/VX).

Suspension pieces are suspension pieces. Dont see an issue there.. but YMMV.

Torsion bars up front with the A-arms, and the multilink coil in the rear.

Cant confirm, nor deny the halfshafts, but it seems to me that they are the same as the widths are close, if not identical.

[nater]

I've got LSD in my 2000 Trooper LS 4x4. (Factory).

Nate

[WyldWeasel]

Hey, VehiGAZ I just found out something from my local dealer which may apply in your case. Because the hunny and I each have salvage vehicles which have both had the hoods replaced, I ordered two stickers (those ones that go under the hood that talk about emissions and tune ups and such). This was about 6 1/2 weeks ago, when I decided to go ahead and paint my Ebony (and at the time I was seriously considering buying the hunny's Proton, which I knew had no sticker cause the salesman told me over the phone).

They said it'd be in in a week, two tops. Two weeks later they said "Huh, we don't know what happened, call back tomorrow." Two weeks later, they said "Try next Thursday." Last week, they said the same. Finally, I walked into the Parts Department today, while I was waiting for the hunny's Proton to get the SDM module replaced prior to my CHP inspection tomorrow (Because the California DMV apparently doesn't believe any other state can perform reliable or accurate safety inspections).

Lo and Behold, they had ONE of the stickers I ordered (the other on b/o). The guy at the counter said that the delay was caused (due to GM pulling out of Isuzu) because the dealership had recently ceased being an Isuzu dealer (meaning, they no longer sell the new Azz-enders) but their Parts and Service Departments will continue to service Isuzu products. So the dealer got a new dealer number and all the old Isuzu parts orders went poofy-bye-bye into the ether, looking for the old dealer number. So they had to reorder it. With their new dealer number. After, of course, I pestered them enough to realize I was serious about getting my parts.

This may be the cause of some of your delays. Meaning that Merlin can certainly help, since St. Charles Isuzu probably isn't pulling out of selling Isuzu's any time soon.