Update on Morgan-tec S/C kit development

[mbeach]

2. You would need to remove the main bracket to change the engine serp belt but, this is part of the beauty of this kit, four bolts and the entire thing comes off the engine. Less than 10min.

It almost looks as if you could take the intake/exhaust hoses off of the s-charger and wiggle the serp belt past it without removing the bracket or the supercharger. You'd have to disconnect it's drive belt, but that's the easy part. Still very slick...

4. It will not be CARB certified since i am using an HKS SSQV blow off valve that vents to atmosphere.

Even if you used a recirculating valve (as in all OEM turbo apps), and returned the vented air to the SC intake, you'd still not have CARB approval. It doesn't matter to many of us though. I only have to visit the sticker guy every 2 years...

5. Intercooling could be possible but it is already tight so i am not sure if it would be realistic to try. Also since this blower has no internal or external lubrication the air discharge temps will not be much higher than naturaly aspriated.

If the air's getting compressed, it's getting heated. If that exhaust port on the compressor side of the charger can be "clocked" around to the 3 o' clock position, it'd be a simple matter of plumbing the piping down the driver's side, across the IC in front and up the passenger side (may have to move the battery) to the throttle body. Either way, it'd be an option, and not a requirement.
I'm more wondering how your going to plumb the intake for the SC -it looks tight to the power steering fluid resevoir.

6. It will be required to swich to an electric fan assembly to make room for the bracket, belt, and pulley. I did this swap over a year ago and am very happy, my temp is more consistant and lower than with my OEM mechanical fan. Plus the loss of the fans parasitic loss will help to offset the blower units.

Very cool, part numbers please?

I think i got them all, i will keep you guys posted, i am planning on having it running in the next week or two. Thanks for the comments and please feel free to keep asking ?s I am hoping that you guys come up with some i have not though of yet.

Thanks for your work, I need to get hopping on my VX community service project as well.
Oh, can you fab up a dual in/ dual out muffler?

[morgan-tec]

If you wanted to go with a front mount intercooler then yes it could be done, and it would not really be that hard. As for the S/C intake the tube has to make a pretty tight 180 to come back forward and then the MAF and filter go right next to the stock air intake hole in the fender well. There is a spacer and bolt that would stop you from slipping the serp belt off the way you describe but the bracket is really easy to remove. My guess is that even with the fan swap the entire install should take less then 4 hours with a somewhat skilled wrench. As for the CARB, since this is so easy to put on it is just as easy to take off if you had to to go get the sticker.

AS for the muffler, pm me with the specs and i will get you a quote, i need tubing size and choice of stainless or steel.

[morgan-tec]

Okay belt is on and i had it spinning tonight. Much louder than i was expecting but not crazy like prochargers. Intake tubes next week and then we hit the dyno for some tuning.

[Andrey]

Very nice ! Do you expect significant increase in fuel consumption ? Interesting if in the future it will be possible to have a model with "on demand" feature - like A/C compressor - it just sits there and waits for you to push that A/C button

[Hotsauce]

Thats the way all superchargers are. no boost at cruise, instant boost at WOT. The clutched in SC you saw on Mad Max is a falicy.

John C.

[Knigh7s]

I can't stop drueling! Can't wait to see the dyno results. Put me down for one when you have a production model ready!! =P

[Nazrat]

Thats the way all superchargers are. no boost at cruise, instant boost at WOT. The clutched in SC you saw on Mad Max is a falicy.

John C.

Not entirely true. Mercedes uses a clutch on the front of their superchargers, for the sake of fuel economy.

Some brief info at:
http://www.sae.org/automag/techbrief...001/techb3.htm

-Tad

[volume311]

Hope MTdoesn't mind, discovered this by accident
http://s66.photobucket.com/albums/h2...t=100_1180.flv