Thanks for the replies Tone and Scott,
I tried Tones option first , took me a minute to find that green button but I DID find it
I held in the green button for a minute or so ... let it go ... and then clicked the remote twice to no avail, so then, I held the green button in while I pressed the button on the remote for a mintute to no avail again.
I decided to go get a bite to eat and a few drinks for a few then came home and disconnected the negative battery terminal, not knowing how long to leave it disconnected I simply hooked it back up after less than a minute ....alarm kicked on and scared the ***** out of me! Made several more attempts to connect the battery terminal but the horn again, kept beeping and scaring the ***** out of me (not expecting this after a few drinks at 11 pm ;eekg; ) finally ... I got the terminal hooked up. Tried the remote several times and it works like a champ now
I guess the question I have now is....WHY DID I HAVE TO DO THIS?
Was it ... the alarm / remote antenna re-location (that worked fine for the first 2-3 days after performing) and the alarm should have been reset after this procedure due to the signal difference?
[OR
was is something else, coincidentally, that had happened after the antenna re-location?
Any ideas? as this will be good info for others down the road.
Reply With Quote