Door Popper.....ARGH!!

[Moncha]

Sounds cool..

Just a simple 3 prong horn relay (usually 30amp) would work. On the included diagram, instead of a horn just pretend it's the solenoid.

[MSHardeman]

Monch,

The relay's are usually about a 1"x1"x1" cube right? Where is the best place to mount them (I say them because I'll need one for the fog light switch too)? It's a little crowded under the dash and it seems strange to mount them in the engine compartment. Where are the stock ones mounted? Maybe the new ones could go near there?

Thanks for all of the help so far.

Mark

[Moncha]

You can get those, they'll be fine. I mounted mine in the driver's side footwell, behind the cover. There's just enough room.. And you'll find the OEM ones there too. As far as the relay for the fog lights I mounted mine under the hood as the relay and fuse came with the harness, I just modified it to fit the "Accessory box" idea.

[MSHardeman]

Moncha,

Thanks so much for all of the help. I thought that this would be a quick install, but I guess I was mistaken. It's now taken me a few solid days of crawling around the VX and taking the thing half apart. Granted, I was being very careful, and very particular about running the wires so you wouldn't be able to see anything.

I thought that I saw the stock relays behind the driver side kick panel, and that's where I was going to try and put the new ones.

When I do my fog light install I plan on doing your accessory box idea, and I already have most of the parts. Now I just need some time that the VX can be laid up and not driven as I'm sure the lights will take me longer than the door popper. I have your instructions for installing the Mico DE's, but I got some lights with "Angel Eyes" and I'm sure the mounting will be a little different. Can't wait to jump into it.

Thanks again.