Quote Originally Posted by VX4EJR
Just a question or two...
1) So you ran your own wires connected off from the existing front dome light to the back...what kind and how many wires were used?
2) How did you get the wires to go under the headliner (without drastically removing anything or destroying what's under the liner, like the adhesive,etc)?
3) Is the new light just mounted to the headliner or is it bolted to the metal underneath somehow?

Appreciate the info!!
1) I ran a total of 3 wires, the Dome Light had two and I also ran a Ground Wire from the New Dome Light to a solid ground on the body. I used left over 18 gauge wire from another Mod I did, (Moncha's Front Corner Marker Conversion to Turn Signal).

2) The Rear Headliner Trim is only trim piece to remove. The trim will come off if pulled rearward with careful help of a screwdriver. The Headliner has about an inch of insulation glued to it but it's not glued to the roof. The wires were easily fished with a coat hanger.

3) I mounted the New Dome Light direct to the Headliner using sheet metal clips.
_______
rickshaw
Original Owner
#467 01' Dragon