How many splines are there on the Vx rear axle??

[Swordy]

Originally posted by coachreed
where would he go to get sucha thing?

If you were in So Cal, I'd say http://www.TriCountyGear.com
East coast , maybe http://www.tellico4x4.com could likely set you up.
I believe Michael Woods had the 60's for his awsome Amigo done at http://www.boyceequipment.com (probably modified military bolt pattern 60's)
MO? who knows
Moser Engineering
Dutchman Motorsports
Currie Enterprises
Dynatrac
Are also good sources.

Realize though, you are not talking some cheapy minor mod here. This is the ***** and it aint cheap. If you have a dana 60 in front. That is not IFS, that is a solid axle. Then you are talking coil over springs, driveshafts, bake booster, master cyl, and such which will add another 1500(ish) to the picture. You are looking at at least 3.5k to do this yourself, and probably closer to 4.5k+.
GMC has a 1 ton IFS that might be modifiable for the front of a Vx.
I doubt any of these mods would be worth it to most people, unless they are serious rockcrawlers.
And BTW, If you do it, I'mma come drool on your truck!
Swordy