Tail Light Guards

[yellowgizmo99]

Tom I have a passenger side one with small crack in it he can use, but would like to get it back when he is done with it. The crack is not that bad so if run into problem with the good one have now could use that one in a pinch.

[VX KAT]

Thanks Tom & gizmo....I don't want to cut in line on the other things WelderGuy is making.

I have a few more vehicles I've found that have a similar shape..what I'm going to do now is get measurements.....I'm going to have to go to a parking lot with my tape measure.... since I'm not having any luck with sellers responding with measurements, or they're inventory is not on site.

This may take a while, but I'm going to keep at it
If anybody has any of these trucks, or has access to one, PLEASE let me know tail light meausrements.

Possibilities:
1) 2005- 2008 Toyota Tacoma
2) 2004 -2007 Dodge Durango
3) 1998 -2003 - Dodge Dakota (not SLT)
4) 2004 GMC Envoy/Chevy Trailblazer
5) 2005 -2007 FORD F-150 STYLESIDE/FLAIRSIDE-turned upside down ...yes, upside down since a welder is going to fab tabs anyway....

[tom4bren]

Giz - Yah, I'd like to borrow the cracked tail light.

KAT - Mebbe I can move it quicker if I prototype it in copper tubing (which I can work with) and then just hand it off to Ron to fab in stronger material and weld on tabs.

[VX KAT]

Giz - Yah, I'd like to borrow the cracked tail light.

KAT - Mebbe I can move it quicker if I prototype it in copper tubing (which I can work with) and then just hand it off to Ron to fab in stronger material and weld on tabs.

Hmmmmm, that's an interesting idea.....but still sounds like a lot of work for you. Let me putter around a bit longer and see what I can find, if anything. Thanks for your help!