Rough Running after Timing Belt Install

[VCrossfan]

I know in the diagram I emailed kpaske it's fig.#7 and The question was about the double lines that are together, that has to be in the same groove as the notch on the spacer behind the pulley on the crank...The single lines are the cam marks.

I see what you mean about the reference marks on the belt at 9:00. My Gatorback just had the two lines together you lineup with the crank pulley notch and line on the block at 3:00..

Checkout Joe_Blacks post #5 at the crank pulley Notch and alignment mark..it's 3:00...The two lines on the Gatorback lineup with that mark..

I used the marks as mentioned and my Vcross runs great..

psychos2 I can email the scans that I sent kpaske??