OME 912 lift

[BBVX]

Scott,

I get the same thing, noise only while maintaining speed. No sound while accelerating or coasting (slowing down). It's definitely a driveline vibration thing.

Do you offroad at all? My dealership diagnosed the problem as being bent rear axle stabilizer bars and a bent lateral rod, in other words, the things that hold the axle in the proper place. They wanted $1200 to replace all three. Instead we put it on the lift at a buddy's garage, took the rods off and straightened them with a jack. The sound all but disappeared, until I took it offroading again.

When I get a chance, I'll probably replace them with rods from Stinkyfab. They're much cheaper, and pre-bent.

Brian

[dkmiller68]

I did not experience any problems with mine. I did the ball joint flip and had the front alignment performed at the same time. Then I drove from Atlanta to Moab and back...no problems.

[Scott Harness]

mbeach ,it continues until rear is loaded again. the slightest weight transfer starts and stops it. or speed gets under 60 mph then it doesn't vibrate