Results 1 to 13 of 13

Thread: OME 912 lift

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Oct 2004
    Location
    99 Victory White Ironman 0685
    Posts
    1,579
    Thanked: 0

    OME 912 lift

    Has anyone had problems with the OME 912 lift? I lifted my vx with the 912 lift. When I'm at highway speeds and lift off throttle a vibration occurs. The instant you add throttle the vibration stops. I made sure the springs were seated properly,it helped a little,but the vibration was still there. I put the stock springs back on. No vibration! My question is "Can you get a bad set of springs?" It seemed they had bad resonance! Thanks for any help. Scott
    [SIGPIC][/SIGPIC]
    Chi Dog...Dog is my Co-pilot
    Onward thru the fog
    Leave it BETTER than you found it!

  2. #2
    Member Since
    Dec 2002
    Location
    '01 Ironman
    Posts
    1,286
    Thanked: 0
    I get the same vibration too, I figured it could be the angle of the front drive shaft? It kinda hops on the highway when foot is off the gas. When $ allows I want to get a CV drive shaft, hopefully that will fix the vibration.
    2001 Ironman Daily Driver... 3.5" suspension lift (OME912 springs and 1" spring spacer), ball joint flip, 1.5" front diff. drop, 33"x12.5 TrXus MT, 16x10 Eagle Alloy rims, Interceptor, PV muffler, K&N air filter, Alpine Supercharger, Bilstein shocks, and some trimming.

    2000 Ironman Project LS-1 VX... very slow progress but someday....... ohhhhh someday......

  3. #3
    Member Since
    Jan 2003
    Location
    2001, IronMan White, #440
    Posts
    1,750
    Thanked: 0

    Question Font End Alignment

    Scott,
    Did you get your front end aligned after you put the OME 912s on?
    Peace.
    Tom
    "Through Great Sacrifice..... Great Rewards Will Be Achieved"

  4. #4
    Member Since
    Oct 2004
    Location
    99 Victory White Ironman 0685
    Posts
    1,579
    Thanked: 0
    Thanks AlaskaVX, Hi Tom Yes I did the front-end aliighnment. The vibration was definately coming from the rear. I had someone drive me around while I laid in the back and listened.

  5. #5
    Member Since
    Jan 2005
    Location
    Former owner of 01 Ironman #0723, 01 Dragon #0590
    Posts
    952
    Thanked: 0
    I picked up some 912s from Crager34, who had them for some time and never installed them. Now, I'm considering using these things as a door stop as well.

    When the vibration starts, does it only occur at the moment the rear suspension is unloaded (weight transfer)? Or does it continue to do vibrate until the rear suspension is loaded again?

  6. #6
    Member Since
    Dec 2002
    Location
    '01 Ironman
    Posts
    1,286
    Thanked: 0
    Well it doesn't do it while on the brakes so wouldn't the rear be unloaded then? It only tends to happen while coasting. I have had my front drive shaft boot tear before that is whe lead me to believe that the angle is what was causing the vibration.

  7. #7
    Member Since
    Nov 2004
    Location
    2001 Kaiser Met. Silver #0551
    Posts
    141
    Thanked: 0
    Quote Originally Posted by mbeach
    I picked up some 912s from Crager34, who had them for some time and never installed them. Now, I'm considering using these things as a door stop as well.

    When the vibration starts, does it only occur at the moment the rear suspension is unloaded (weight transfer)? Or does it continue to do vibrate until the rear suspension is loaded again?

    If your considering selling them, I'd like first crack.

Similar Threads

  1. To lift or not to lift that is the question
    By CatFish in forum VX Talk...
    Replies: 5
    Last Post: 03/28/2012, 03:15 PM
  2. VX Lift
    By ramil89 in forum VX Talk...
    Replies: 6
    Last Post: 06/07/2010, 09:51 PM
  3. lift set up
    By pbkid in forum VX Modifications...
    Replies: 17
    Last Post: 04/12/2008, 01:25 AM
  4. lift?
    By Johnny108 in forum VX Talk...
    Replies: 4
    Last Post: 04/08/2008, 09:56 PM
  5. Lift thread to end all lift threads
    By tbigity in forum VX Modifications...
    Replies: 14
    Last Post: 05/22/2007, 10:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails