Results 1 to 3 of 3

Thread: Rear shock ?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jul 2003
    Location
    '01 Ebony #0939
    Posts
    2,142
    Thanked: 5
    My '01 VX was already equiped with the Rancho 9000's when I bought it, but I had test driven another '01 with ~30k miles that still had the stock shocks prior to my purchase. All I can say is that the Ranchos would be a very nice improvement if you choose to go that route. I don't know of anyone with the new coilovers, but maybe someone here has them and can offer an opinion.

  2. #2
    Member Since
    Jun 2002
    Location
    2001 Proton VX 0790
    Posts
    801
    Thanked: 0
    That might be nice without the coilover. With that and the original spring you'll have too much rear spring rate, and it will cause the rear of the truck to kick out(oversteer)

    You could run the coilover without the original spring.

    The Rancho 9000's are a very soft shock, even on stiffest setting. The Billstein, or KYB are stiffer.

    John C.

Similar Threads

  1. Sheared rear lower shock mount bolt
    By VR4-Quest in forum VX Talk...
    Replies: 3
    Last Post: 01/27/2006, 03:35 PM
  2. Useful Shock Travel
    By BD-VX99 in forum VX Modifications...
    Replies: 5
    Last Post: 11/30/2005, 01:28 AM
  3. KYB Shock Sticker
    By VR4-Quest in forum VX Talk...
    Replies: 5
    Last Post: 03/12/2005, 10:12 PM
  4. My SHOCK debate
    By VR4-Quest in forum VX Talk...
    Replies: 30
    Last Post: 01/02/2004, 11:48 AM
  5. New Shock Advice?
    By the-barman in forum VX Talk...
    Replies: 3
    Last Post: 09/05/2003, 12:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails