Results 1 to 15 of 19

Thread: Question...

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jan 2005
    Location
    Former owner of 01 Ironman #0723, 01 Dragon #0590
    Posts
    952
    Thanked: 0
    I miss teh Nasioc OT. Sometimes.

    Alan, where's that frequency? I'm getting some handhelds together for Caribou season and I want to get that freq on there as well.

  2. #2
    Member Since
    May 2004
    Location
    No VX anymore. :(
    Posts
    1,335
    Thanked: 0
    A plane's speed is generated by air thrusting devices (props or turbines). The wheels are freely rotating. A conveyor running opposite the plane will only double its ground speed, but will not significantly alter the air speed (I say not significantly because there will be some "drag" caused by the minimal friction of the rolling wheels. For the most part it's irrelevant though). The air speed is what is required for take-off.

    Similarly, a plane in high headwind can take off at very low ground speeds. I've taken my model planes down to the airfield on very windy days and taken off almost without moving (relative to the ground).

    Edit: Bleh, NOW I see BD-VX99's post.
    Steve

  3. #3
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Yes it can...



















































    ...if it is an AV8 Harrier! :yesr: :yesg:
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  4. #4
    Member Since
    Dec 2004
    Location
    '99 VX Astral Silver #0949
    Posts
    633
    Thanked: 0
    [QUOTE=transio]A plane's speed is generated by air thrusting devices (props or turbines). The wheels are freely rotating. A conveyor running opposite the plane will only double its ground speed, but will not significantly alter the air speed (I say not significantly because there will be some "drag" caused by the minimal friction of the rolling wheels. For the most part it's irrelevant though). The air speed is what is required for take-off.

    Similarly, a plane in high headwind can take off at very low ground speeds. I've taken my model planes down to the airfield on very windy days and taken off almost without moving (relative to the ground).

    A conveyor belt would only spin the wheels twice as fast as the thrust would move the plane forward even without the wheels. Some planes use skis as an example

  5. #5
    Member Since
    Jul 2004
    Location
    2000 Black VX 0363
    Posts
    766
    Thanked: 0
    No it would not fly because the generation of lift is only possible with apparent wind flowing over the wing surfaces.

    (unless its a harrier, in which case its a flying Microwave, or a North Carolina Lawn Dart)
    2000 Black VX 105k

  6. #6
    Member Since
    May 2004
    Location
    No VX anymore. :(
    Posts
    1,335
    Thanked: 0
    Quote Originally Posted by Bulldoggie
    A conveyor belt would only spin the wheels twice as fast as the thrust would move the plane forward even without the wheels
    I'm not sure if you're agreeing or disagreeing with me, but that's pretty much exactly what I said (or was trying to say).

Similar Threads

  1. Replies: 7
    Last Post: 01/28/2004, 10:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails