In-Dash Inclinometer + Gauges

[moon buggy]

Hey man if you lived in Australia near me, I'd be calling you right now tellin ya I've 'fired up' the barbie and I've got a slab of beer with your name it ...bring all your technical bits over I'll clear the garage [ and kids]...and let you do 'your work' .. I gladly open each can for you, at your request [and perhaps down one of two myself, for quality assurance purposes, ..of course] ...damm 'the tyranny of distance'......anyways ...nice job
Well Done !!

[Triathlete]

Info on the inclinometer? Where did you get it? Web site? Thanks!

[Ldub]

Looks Great! btw, do ya ever have enough time to look up at the road???

Just kidding Julian...it looks great. Ldub

[JULIAN911]

Moon Buggy and all,

Thanks for all the compliments. You can get the inclinometer from jcwhitney, they only have one on the website so should be easy to find. I performed a little surgery on it by installing two 194 blue LEDs and hooking it up to the light switch so it would turn on with the dash light. The LED clock was also purchased from jcwhitney. The ODB2 scan gauge was purchased from Tone and it came within 2-3 days.

I'm glad you guys enjoyed it

[lemacfar]

couldn't find it on the site...

[JULIAN911]

Digital Clock P/N ZX812798R:
http://www.jcwhitney.com/autoparts/P...roup?Ntt=clock

Inclinometer or JC Whitney called it Grade/Tilt Indicator P/N ZX492608A:
http://www.jcwhitney.com/autoparts/P...lt%20indicator

[Raque Thomas]

Could you show us a day time view of that install? Curious as to how you installed the inclinometer since it is in a case. Did you use the front bezel, or make a custom one?

[gunner]

The ODB2 scan gauge was purchased from Tone and it came within 2-3 days.

I'm glad you guys enjoyed it

Got a link?

[VehiX]

Got a link?

Here ya go:

http://www.tonemonday.com/vxparts.html

JULIAN911, you should replace the graphic of the Jeep in the inclinometer with a VX

[Ldub]

Got a link?

Gunner,
Welcome to the group! If you want to check out the scan gauge up close, pm me.

Ldub

[JULIAN911]

I'll try to take a pic of the inclinometer during the day so you guys can see clearly how it's fitted in there. Will have to wait until this weekend since it's already dark by the time I get off work.

Basically, I removed the ashtray + bracket and squeezed that thing in there. I also had to create a little bracket to hold it in there (not hard to do). The inclinometer came without lighting. I took it apart (very easy), drilled a hole in the back and put two blue LEDs in it, and wired to the instrument on/off circuit. I soldered the LED's directly to the wires, no LED base was used.

If you guys are in Austin, I'll be more than happy to help with the installation or just email and I'll help anyway I can.

I agree that the VX pic in the inclinometer would be more appropriate than the jeep but that's beyond my capability