Hey does anyone know whether this part is the part i should be looking for..I have tried to locate here in Australia but on Rodeos etc here they changed the way they did the doors..
I found reference to the part here...mentioned here http://www.planetisuzoo.com/articles.htm/39

I sent the author of this thread an email, but his address no longer exists [failed returned]..here's the text from my email for more info, pics are earlier in this thread..
I have attached the pic of the 'nylon bushing' Isuzu used on the VX, and you can see how its worn, my passenger door is missing its bushing hence the problem/noise.

..I used your part number here in Australia, at the local Holden/Isuzu dealership...but the part is not listed...they looked at the door 'fittings' ..while similar.. the door check pin design on Rodeos here in australia has changed ...[ I even did the round of Rodeo/Jackeroo/ frontera wreckers] ...so... I am trying to track this part down [ ie your part number] ..of course assuming that's the part I need for the VX

You'll see as an interim fix, i have used basic [unfortunately too soft ] plastic plugs to address the problem ..but I am hoping then the brass bush you speak of will do the job...the door popping without the bush is very loud..and the door to open is quite stiff as it goes thru the 'staggered ' opening and the pin kind of jumps around in the bracket attached to the car body itself..


You'll see in pics I have attached where it goes, and the others show how much of a 'sleeve' it needs

Any input on this would be appreciated