At present I have approx' 3" lift but I'm half way through installing the plates to drop the front diff then I'll be installing the coil spacers and cranking the Torion bars again. Altogether I think it should be 4" - 4 1/2" higher. I'm running on 285/75 R16 All Terrains on 16"X10" alloys, I needed to do a slight bit of cladding trimming but nothing much. I've also done my own camber adjustment, not too difficult just very fiddling as you have to get your hands into a very small area.

SPAZZ
If the Calmini springs sag why not get the OME912s?
Also can you give me the reasoning behind extending the Trac Bars and if it's something I need to do could you give me a new length as I'll have to get them made here in the UK.


Col