Trans. Interceptor

[Ldub]

Whoa...

I have girlish little hands and that required some contorting... Don't know how you guys were able to do it...

Haven't taken it out yet, but it's atleast in

Thanks again Kenny!

Yeah, that plug location is a real PITA to get to.
I can't remember how many trips under there it took just to FIND the proper connection...MAJOR pain.

[Kenny]

I tried a MOD to extend the cables 6 feet on both ends so I could put in my lap as I drove around to test various settings - then stuff it under the hood next to the brake booster when done.

Unfortunately, what I found was that even at lowest pressure, I still got a major amount of kicking. I'm not sure if it screwed up the communication with the longer cables - or my '01 doesn't like the interceptor.

I've just been way to busy to shorten the cables back to 6 inches and see if it still kicks... Maybe this summer...



Oh, and in the pic you can see I added some molex type connections so I can take out the interceptor and just have a straight through wiring. Leaving the 12 feet of extended wiring in place without the interceptor inline, the car ran fine - no issues. ??

[taylorRichie]

I'm going to turn my interceptor line pressure down... it's at ~25% now and it's rough as hell... Very surprised... some people say they run 50%

I hope at ~12% mine is more crisp...

We'll see...

[snowtrooper1966]

Are these still available, or do I just have to find one that's laying around (Kenny)
Best,