Wheel fitment question info.please

[Tat2dragons]

Thanks for the info. guys.I checked out Zinik's website and they offer the wheel with two choices of center bore,108 and 78.Of those two I'm not sure which of these are the center bore on the Zinik's that are currently on my Tahoe,which is 4WD.Well,I was hoping I would be able to remove them from my Tahoe and keep them to put on a VX,but I think I'll just sell my Tahoe with the Zinik's as I would feel more comfortable purchasing a set of wheels that will definitely fit a VX.Thanks again for your help.
Heres the Zinik's on my Tahoe.
http://memimage.cardomain.net/member...0_350_full.jpg
http://memimage.cardomain.net/member...0_325_full.jpg

[Tat2dragons]

Well it seems from reading that link that was posted,the VX is a 110 bore,so if my wheels are 108 center bore,they are not going to fit.Thanks everyone for your help,I appreciate it.

[Tone]

The bore of the stock VX wheels is just under 108.

[transio]

108 will fit the VX hubs in diameter - actual diameter of the hubs is under 100mm, but remember that the hubs protrude FAR from the mounting face.

[Tat2dragons]

Thanks for all the helpful info. but as of now I've decided to just sell the Tahoe with the Zinik's,as I might be able to sell it for a little bit more money.When I get a VX,I'll just purchase a wheel and tire combo that is already known to work on the VX's.

[Triathlete]

Maybe a kind VX owner in the Baltimore area would be willing to let you do a test fit on their VX...then you would know for sure. I'm pretty sure there are several from your area on the board!

[transio]

I think you're doing the right thing. In my opinion, those wheels just don't "fit" the VX's personality right, anyway. Leave them with the tahoe.