Wheel fitment question info.please

[Tat2dragons]

Hello,I'm currently in the process of removing mods from my current vehicle,which is a 97' Chevy Tahoe.I'm doing this so I can sell it to purchase a VX.My Tahoe has 6x5.50(139.7) bolt pattern 20X8.5" chrome Zinik Z1 Shoguns wrapped in 295/50/20 Falken Ziex S/TZO4's I would like to find out if these will fit a stock VX,because if so,I will remove them from my Tahoe before selling and keep them to install on a VX.Oh at the moment,I'm not exactly sure of their offset I think it's 15mm,but I'll try to find out tomorrow. Thanks alot.

[Cyrk]

Yep should fit... www.tirerack.com has them listed for the VX. only thing is your tires probably will not fit, they are recommending 275/45-20.

Zinik Z1 Shogun
Finish: Chrome Plated
Bolt Pattern: 6-139

20x8.5 $350 each

Availability: In Stock

Recommended Tire Size:
275/45-20

[smorris65]

The VX is not listed in the tirerack drop down. Which Isuzu do you choose to find wheels that fit the VX?

[Cyrk]

Shop for wheels > Isuzu > Select Year > 2000 and Click GO
2000 Isuzu > Select Model > Vehicross (last one at the bottom of the drop down).

[Tat2dragons]

Yeah,I was looking around on Tire Rack's site and it seems that they just list tire/wheel upgrade sizes,that are closest to the vehicles factory diameter. Would the 15mm offset be a problem on a VX? I noticed on here that some members where running 285/60/18's on there VX's.Are those on VX's that are lifted or stock suspended.When I check sizes on a tire calculator it seems that 295/50/20's are extremely close to that diameter.Thanks for your help.

[Triathlete]

Just make sure the center bore is large enough for the VX. The VX's is a bit larger than most. Good luck in your hunt for a VX. There are severa for sale here on the board that may be worth taking a look into.