Results 1 to 15 of 15

Thread: Where to start?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jun 2002
    Location
    '99 Ebony Black VX, 0339
    Posts
    2,073
    Thanked: 0
    I also recommend the 2 combination ODBII gauge units that read and reset codes that let you monitor quite a number of variables live while driving that can alert you to potential issues. Square Scan Gauge that sits on the dash is $125 delivered and the 52mm round unit for pod mount, it $249.00 - email me for more info if questions not answered on the lower left of .info home page.

  2. #2
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    800
    Thanked: 0
    check the maf connector, unplug and replug. might want to pull the maf and inspect. check all injen intake hose connections for leakage. do you have an oilable air filter/ is it over oiled?

    It looks like one o2 sensor may be bad or have a wiring problem. judging by the codes it doesn't seem too complex a problem or expensive to repair.... unless other codes show up. your orig. post said it had 5 codes.

Similar Threads

  1. won't start
    By simonsayz1 in forum VX Talk...
    Replies: 12
    Last Post: 11/25/2014, 10:38 AM
  2. Will NOT start!!!
    By VXNIT in forum VX Troubleshooting...
    Replies: 15
    Last Post: 10/26/2007, 10:04 AM
  3. VX won't Start!!!!!!!!!!!
    By BigJoe in forum VX Troubleshooting...
    Replies: 10
    Last Post: 09/13/2005, 09:47 AM
  4. Help! Won't start
    By ISCE in forum VX Troubleshooting...
    Replies: 21
    Last Post: 12/14/2003, 03:20 PM
  5. HELP!!! Sometimes Won't Start
    By chumone in forum VX Troubleshooting...
    Replies: 11
    Last Post: 10/20/2003, 07:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails