I had to open up the bore in my new 22s, i used the machine center (mill) at the shop. Took about one hour with setup. I went from a 74mm to a 108mm and went 9mm deep. You could really weeken a wheel if you take out to much metal so be careful.
Super VXer
I had to open up the bore in my new 22s, i used the machine center (mill) at the shop. Took about one hour with setup. I went from a 74mm to a 108mm and went 9mm deep. You could really weeken a wheel if you take out to much metal so be careful.
Drive it like ya stole it!!!
2002 Axiom XS
-20" Eco 820s with Goodyears
-Custom fiberglass system...Rockford, JBL
-Cutom powerdyne supercharger in the works
-Cutom functional WRX hood scoop
-Custom morgan-tec dual exhaust
-Morgan-tec high flow intake kit
For prices, pics, audio and vid clips of my products please check out www.morgan-tec.com
Super VXer
Just make sure you take the metal off all the sides fairly evenly so that tightening your lug nuts centers your wheel. If the hole through the wheel binds on the hub while tightening it, your wheel will be running off center. If I remember right Our hubs are 99mm.
Its the thrill of the chase
Posting Permissions
Reply With Quote