Quote Originally Posted by CowboyErik View Post
Thanks for the reply Ron, I had to release the clip to get the bulb out, so now I'm trying to get that clip back on to hold new bulb in place, I am hoping the driver's side comes off easier so I can pull the boot off and see clip in place. I should have taken a picture before I unscrewed it but the boot would have made that useless I think, if only the electrical connector to the bulb would have released first............. ! back at it shortly!
After you remove the rubber boot, I believe you can just remove the electrical connector by squeezing the sides and pull back. I'm pretty sure you have to squeeze real tight to release the connector lock. When you re-plug the connector, there should be a 'click' sound which means the connector is engaged.

If you want a real good luck at the driver's side, removing the air box will help get a better visual. A few bolts and the box is removed. Study the orientation and placement of the clip in relation to the housing and it'll make sense.