Feeling ballzy?
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7959027822
Here's info from seller:
Dear sgt.batguano,
You asked:
"Hello, I have many questions. Is this custom built or is it manufactured by vortech or other major vendor? Where does the unit bolt to; do any accessories need to be removed to make room for this? Does this require a custom size serpentine belt? Why did you remove it? Did it cause a blown head gasket or engine? Did you have a boost gauge and if so, what was the max. boost produced? Do you have info where to run the oil lines?"
(the reply)
"oh boy... I didn't carve it out of wood, it's made by vortech. The bracket, however, is custom made for a Rodeo. If you plan to put this in a Rodeo, you'll need to relocate your battery to the driver side. It bolts onto the block itself(timing belt cover bolts). It comes with the extra belt needed. It was removed because I traded the car into Carmax(They don't compensate for any upgrades). When it was running on the 2.5" pulley, it produced 11psi. The return line has to tap into the oil pan. the feed line T's off the oil pressure switch. Hope that helps."
Reply With Quote