Results 1 to 15 of 100

Thread: Mods for robotic VX

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #12
    I spend quite a bit of time playing in the California Desert. In fact I'll be heading out there for the weekend in a few hours. I'll vote for Dirtgripz or a similar tire. 11.5 to 12.5 wide. Use as tall a tire as you can reasonably fit without interference. Something with extra thick (E rated) sidewalls to deal with the jagged rocks. Air them down to like 13-15 lbs. for good stable contact, shock absorbtion, and floatation. For good bite, they should be luggy critters with a decent amount of void between the lugs. The sidewalls should be fairly tall.
    If you go with a thinner C or D sidewalled tires, to obtain the desired squish factor, air up to a higher pressure. Obtaining the right amount of air-down is important to keep you from sliding on hard surfaced rock laden corners. They do need to be stiff enough to minimize body roll though. Use some strong cast smaller diameter rims. Not steel. Use some fairly stiff shocks in the rear, or/and split your rear bumpstops since riding on the bumpstops kills your traction at any appreciable speed.
    At the risk of sounding conceited or arrogant... Actually,, to haul @ss across the Ca desert. I'd pretty much set it up like mine.
    Last edited by Swordy : 03/04/2005 at 11:36 AM
    Its the thrill of the chase

Similar Threads

  1. mods mods mods on the mind.
    By ABDragonVX in forum VX Modifications...
    Replies: 34
    Last Post: 03/09/2013, 08:51 PM
  2. Robotic VX to compete again!
    By Art in forum Austin Robot Technology
    Replies: 32
    Last Post: 08/27/2010, 02:47 PM
  3. DARPA Robotic VX...its no longer an urban myth!!!!
    By Triathlete in forum VX Talk...
    Replies: 15
    Last Post: 10/12/2005, 08:29 AM
  4. Dinner w/the robotic VX team in Tucson 9/23/05
    By Triathlete in forum Meets...
    Replies: 2
    Last Post: 09/23/2005, 01:21 PM
  5. Skid plates for robotic VX
    By Art in forum Austin Robot Technology
    Replies: 10
    Last Post: 03/10/2005, 05:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails