Results 1 to 15 of 100

Thread: Mods for robotic VX

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #20
    I think after you try the tires you'll find that 25 lbs is still pretty stiff. I would suggest trying them at 25 and at 15 and notice the difference in traction and handling on rough dirt roads.
    If you are using those internal beadlocks you could actually run at 0 psi if for some reason you chose to. As for the tire sealant, I'm not sure about that brand, but some brands will cause aluminum oxide to form inside the rims making them brittle. I'd also find out from staun if tire goop will hurt the internal locks.

    just thoughts

    By the way, is this thing gonna be able to shift in and out of 4 Lo? or will you just leave it in 4 Lo? With a top speed of 40 it wouldn't be out of the question.
    Most importantly,, when you run this puppy across the desert, let me know. I'd reallly like to watch.
    Andy
    Last edited by Swordy : 03/09/2005 at 10:11 PM
    Its the thrill of the chase

Similar Threads

  1. mods mods mods on the mind.
    By ABDragonVX in forum VX Modifications...
    Replies: 34
    Last Post: 03/09/2013, 08:51 PM
  2. Robotic VX to compete again!
    By Art in forum Austin Robot Technology
    Replies: 32
    Last Post: 08/27/2010, 02:47 PM
  3. DARPA Robotic VX...its no longer an urban myth!!!!
    By Triathlete in forum VX Talk...
    Replies: 15
    Last Post: 10/12/2005, 08:29 AM
  4. Dinner w/the robotic VX team in Tucson 9/23/05
    By Triathlete in forum Meets...
    Replies: 2
    Last Post: 09/23/2005, 01:21 PM
  5. Skid plates for robotic VX
    By Art in forum Austin Robot Technology
    Replies: 10
    Last Post: 03/10/2005, 05:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails