Quote Originally Posted by mbeach
My $.02
The RCX control unit is a POS. The gauges (mechanical) leak, and there is very little room to mount the control faceplate in the VX. There are far to many "push to connect" junctions, and all of these connections have the potential to become leaks.

The shocks however are excellent for the money. I'd say install the shocks and skip the control unit. Set the firmness to your liking, and drive leak-free.

.
thank you for your advise.

i did most of the mods for my vx myself, (like oil change, light change, fog light intallation, bull bar installation...) but for the shocks' do-it-yourself project, i have never step into this area before. therefore i need to do some research and gather some info before i start doing it. (if i can find a step by step intro that will be perfect)

and this forum is for ppl to discuss and share experience of their mods, now i have questions and bring it to the public see anyone can help me out. if you don't know, or lazy to type or whatever reasons or views, you can just not to answer it then. perhaps, your leak problems maybe because you didn't do a well enough do-it-yourself project, i mean, maybe.