Page 1 of 2 1 2 LastLast
Results 1 to 15 of 27

Thread: anyone know the part number

  1. #1
    Member Since
    Oct 2002
    Location
    1999,black,vehicross
    Posts
    193
    Thanked: 0

    anyone know the part number

    does anyone know the part number for the cubby hold that fits where the stock cd changer is, ive seen it on here b4 and can't find it

  2. #2
    Member Since
    Jun 2002
    Location
    00 00 00
    Posts
    1,627
    Thanked: 0
    I believe it is 89711-47570, labeled as the Trooper Instrument Panel Components Pocket.
    Last edited by Dallas4u : 01/30/2005 at 08:17 PM

  3. #3
    Member Since
    May 2003
    Location
    2001, Kaiser Silver #1213
    Posts
    111
    Thanked: 0
    Quote Originally Posted by Tone
    Storage box IS available to replace the area where the changer resided and has not been discontinued nor will it by for a few more years as it fits up to 2003 Isuzu products. p/n is 8-97129-980-0 and St Charles will sell to us for little more than $10 w/ free shipping. Toll Free: 800-727-8066
    Found this hope it helps.

  4. #4
    Member Since
    Jun 2002
    Location
    00 00 00
    Posts
    1,627
    Thanked: 0
    Seems 897129-9800 has the same description but fits 98-02 Trooper, and 89711-47570 fits 95-97 Trooper.

    I'd go with the 98-02 (897129-9800) item. I remember I replaced mine 4 or so years ago... but I can't remember which parts number I used.

  5. #5
    Member Since
    Jun 2002
    Location
    '99 Ebony Black VX, 0339
    Posts
    2,073
    Thanked: 0
    Both fit

  6. #6
    Member Since
    Jan 2005
    Location
    2000 Proton Yellow VX 0586
    Posts
    94
    Thanked: 0
    You guys read my mind, I'm yanking my cd changer which is packed with the previous owner's cd on Wed. and planned to make that a storage area!
    Plus this will be my first mod - Pioneer 8600 cd player!

  7. #7
    Member Since
    Jun 2003
    Location
    1999, White, Ironman, 1626
    Posts
    168
    Thanked: 0
    I got the cubby replacement for cd changer part # 8-97129-980-0 from St. Charles and installed it tonight, but it doesn't seem to fit correctly
    I used the brackets from the CD changer and pushed the plastic pegs into the holes on the bracket and then screwed in the brackets... is this incorrect?
    The box holds firms, but there is a gap between the front of the box and the trim.
    Please help.

  8. #8
    Member Since
    May 2002
    Location
    2000, Proton Yellow, VX, 0584
    Posts
    2,584
    Thanked: 10
    NOT being smart, could itbe upside down?
    Scott / moncha.com

  9. #9
    Member Since
    Sep 2002
    Location
    '99 Astral #1977
    Posts
    577
    Thanked: 0
    I don't remember using any brackets when I installed mine. It just bolted right up to where the CD changer was and the trim snapped back on around it.
    RichD
    ------------------------------------------------
    ...because vinyl just sounds better!

  10. #10
    Member Since
    Jun 2003
    Location
    1999, White, Ironman, 1626
    Posts
    168
    Thanked: 0
    thanks Moncha, but I tried flipping it over and it is the same.

    AnalogVX - that may be the answer... I had to use the CD Changer brackets with mine... maybe they sent me the wrong one.

  11. #11
    Member Since
    Jun 2003
    Location
    1999, White, Ironman, 1626
    Posts
    168
    Thanked: 0
    I just talked with Merlin and from what he sees, the box doesn't come with brackets, etc.
    Would anyone be willing to take a pic of their cubby and send it to me for comparison?

  12. #12
    Member Since
    Jun 2002
    Location
    '99 Ebony Black VX, 0339
    Posts
    2,073
    Thanked: 0
    One on right is correct and mounts fine - left one might be able to take CD brackets....

  13. #13
    Member Since
    Jun 2003
    Location
    1999, White, Ironman, 1626
    Posts
    168
    Thanked: 0
    thanks Tone... i got the box on the left and used the brackets from the CD changer.
    i inserted the two plastic "pegs" on each side of the box into the holes that were used on the cd brackets to bolt them onto the CD changer (the holes lined up perfectly).

    this resulted in the box mounting firmly, but the front of the box is approx 3/8" from the back of the trim leaving a gap.

    i could probably drill new holes in the CD changer brackets to accomodate the plastic pegs, but i wanted to see what everyone else used.

    is that box on the right the old part number that was discontinued or can i still get it?

    joe

    ps - i will take a pic of my box and mounting tonight

  14. #14
    Member Since
    Jun 2003
    Location
    1999, White, Ironman, 1626
    Posts
    168
    Thanked: 0
    Sorry guys, I haven't had a chance to take a pic on fmy cubby box, but it is exactly like the one on the left in Tone's picture above.
    Has anyone had any luck mounting this style of box?

    Is the other box (8-97114-757-0) still available? It says "Part Discontinued" on my invoice from St Charles.

    I was thinking of checking to see if it is stil available from St Charles or one of the other Isuzu parts places before I start drilling and modifying the CD changer brackets.

  15. #15
    Part 8-97114-757-0 is discontinued. No stocking dealer listed on our dealer to dealer parts locator, so all I can add to this thread is a good luck finding one.
    Don Viner
    Sunset Isuzu
    6211 L Street
    Omaha, NE 68117
    O - (402) 733-2227 ext 214
    F - (402) 733-0395
    M - (402) 505-2147
    don@sunsetisuzu.com
    http://www.sunsetmotors.net

Similar Threads

  1. 01 AC compressor part number?
    By Marlin in forum VX Troubleshooting...
    Replies: 45
    Last Post: 04/29/2012, 08:16 AM
  2. Headlights Part number
    By colmhd in forum JDM Parts & Accessories
    Replies: 5
    Last Post: 07/16/2007, 11:04 AM
  3. Anybody know the wiper arm part number ?
    By Kenny in forum VX Troubleshooting...
    Replies: 3
    Last Post: 08/02/2005, 04:39 PM
  4. Part number help
    By hitnrun74 in forum VX Talk...
    Replies: 3
    Last Post: 06/19/2003, 06:53 PM
  5. Mount kit part number ?
    By e4joker in forum VX Talk...
    Replies: 2
    Last Post: 06/18/2003, 06:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails