Lazy Man's way to deal with VX issues

[DK]

Every journey begins with the first click of the mouse.

[joe-yamma]

tom, i am in the lazy club as well.
i paid bowser to fix my windows (and i'm glad i did).

next time you're there, ask Bruce what it took to fix mine.

[mbeach]

I make my wife climb over the driver's seat to enter the vehicle -my passenger side door lock mechanism is stuck.

[Jolly Roger VX'er]

I can "vouche for" or "second" the above in T2P's list:

1)I have an extra key in my wallet for any full-service fuel stops (handing over key to gas attendent for fuel door) & for opening up the rear door if my keys are in the ignition.....someday I'll hit Tone up for a rear door popper kit!

2)Van Eyes in rear window & sometimes removing rear headrests if I'm not feeling particularly lazy....

3)I did install a hitch myself before the laziness set in!

4)RTV'd the headlight gaskets with clear Silicon about 2 1/2 years ago and they are still where they are supposed to be and it only took me a small amount of time...something like 30 minutes to do both sides! Too lazy to buy the 3M stuff.

[Ldub]

I have had a book on "overcoming procrastination" in my posession for 3-4 yrs.One of these days I'll get around to reading it...maybe.
Lazy?...I left lazy in the dust yrs. ago.

[t2p]

I (almost) forgot one .........
.
the 'cup holder' ........
.
What is wrong with the square cup holder ? It works fine ..... for me.

[t2p]

Joe:
.
I have also had Bowser do some work on my VX. They performed my transmission service - filter and fluid change.
.
I'm much too lazy to perform this operation myself. I was almost too lazy to drive there - because there is another Isuzu dealer that is closer to my home.
.
Plus, a trans filter change can be extremely messy. Taking down a trans pan at home brings back bad memories - much rather do a 4 speed - although aligning the input shaft with the clutch/throwout bearing is a ..... hmm ...... that is another bad memory ......... another bad memory ? how about a starter change that requires the exhaust manifold to be removed ....