yeah...I know people are smoking some really bad stuff when they say they went with bigger tires and their VX is stock and they needed NO trimming.

when I lifted mine 3 inches and only put 32 x 11.5's from the stock 29.5's I had to do some pretty major trimming the front beak and unfasten the inner wheel well cladding and trim from behind the front wheels and CUT SOME SERIOUS METAL OUT, CUT PART OF THE CLADDING AWAY, HAMMER, GRIND, and fasten the wheel well trim farther back to not rub.

when I put the 305 70's on ( 33x12.5's) I had to DO SOME MORE OF THE CUTTING, GRINDING, HAMMERING, and relocating and still when I turn and hit a good curb or bump they touch a little, but only behind the front wheels. I can not cut much farther because I would have to cut away the bolt holding the outer fender piece which would probably flap around then and make the dorr not shut right or hood or something else.