Loctite = Good.
Super VXer
Loctite = Good.
Over 20 years of Isuzu enjoyment...
Super VXer
Doesn't locktite make it harder to get the bolts back off later? I usually use anti-sieze when I'm putting my parts back together.
Calmini Cone Air Filter, PowerVault PV2 Muffler, OME Trooper Springs, Rancho RS9000X Shocks, 285/75R16 Nitto Grappler AT's, Pioneer DEH P8000R In-Dash CD, Amps and Drivers Built by Orion, Wires and Fuse Blocks by KnuKonceptz, Vibration Damping by BQuiet, Alarm System featuring Auto Start and Remote Windows, Yakima LoadWarrior w/Full Size Spare, Debadged/Custom Titanium Grill Logo, Tint (5% Rear / 20% Front), Steel Braided Brake Lines, G2 Painted Calipers
VXer in the Sky
The bolts on the backside of the hub assembly could be lock tighted but they were not from the factory. ALWAYS antiseize the threads on dissimilar metals that will be getting very hot - the threads of the pins the calipers ride on. Do not forget to lubricate the caliper pins with high temp brake grease so that they can float on the rotor and wear the pads and rotors evenly.
Posting Permissions
Reply With Quote