Results 1 to 7 of 7

Thread: Suspension thunk - Help!?

  1. #1
    Member Since
    Mar 2004
    Location
    1999,white,IronMan,1239
    Posts
    3
    Thanked: 0

    Question Suspension thunk - Help!?

    I hope someone can share some helpful advice because I don't know where to start.

    My '99 ironman has almost 70k and I replaced the shocks with rancho 9000 series about four months ago. Shortly there after I started hearing a thunk sound when going over harsher bumps from the front passenger side. There is no problem when turning (unless I hit a bump), so I'm not so inclined that it is related to CV joints.

    Any similar experiences, ideas, or recommendations? I'm looking for some advice before I dive into changing CV joints, I haven't had the pleasure of changing CV joints yet.

  2. #2
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    799
    Thanked: 0
    Sway bar links?

  3. #3
    Member Since
    Jun 2002
    Location
    1999, Ebony Black, VX ,1976
    Posts
    815
    Thanked: 0
    i have had to tighten the lower bolts on the front shocks a couple times. i also have the rancho 9000 .the bushing in the front shock seems to be a little big ,and if the bracket is not tight against the lower shock mount it will make a noise.you should be able to check it if you wiggle the shock by hand. shawn
    1COOLVX

  4. #4
    Member Since
    Jan 2003
    Location
    99 white ironman
    Posts
    276
    Thanked: 0
    hey, got the same exact thing here with the rancho shocks on a 67K VX. This noise is really perticular, only happens on certain bumps and is definately coming from the front end like something is loose.

  5. #5
    Member Since
    May 2004
    Location
    No VX anymore. :(
    Posts
    1,335
    Thanked: 0
    bump stops maybe?
    Steve

  6. #6
    Member Since
    Jun 2002
    Location
    1999, Ebony Black, VX ,1976
    Posts
    815
    Thanked: 0
    it is the shocks. i had the same problem as stated above and tightened up the bottom bolt on the front shocks and solved the problem.i had to do this twice . i believe the hole that the bolt goes through is too big. shawn

  7. #7
    Member Since
    Mar 2004
    Location
    1999,white,IronMan,1239
    Posts
    3
    Thanked: 0
    Thanks guys!!!!!!!!!!!!!

    I can't believe it. I went to go look at the shock, and the bolt had been sheared off!!. The shock was still in place though. I have since replaced the bolt and everything is all good. Thanks for all the posts.

Similar Threads

  1. Help needed with a THUNK
    By Mile High VX in forum VX Troubleshooting...
    Replies: 5
    Last Post: 01/09/2015, 05:51 PM
  2. Suspension Question (Bose Suspension)
    By tysamigo in forum VX Talk...
    Replies: 4
    Last Post: 12/06/2012, 09:32 PM
  3. suspension
    By s2mad in forum United Kingdom Special Topics
    Replies: 6
    Last Post: 10/26/2010, 01:26 AM
  4. suspension
    By fishmanstan in forum VX Talk...
    Replies: 3
    Last Post: 09/20/2004, 09:07 PM
  5. Suspension!
    By diver2k3 in forum VX Troubleshooting...
    Replies: 3
    Last Post: 02/23/2004, 01:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails