The build sheet number off of my radiator is 5225. Contact Dwane (ext 6) at Ron Davis and he will be able to find the product details to build more.
Also, the fans shroud with two fans has a seperate build sheet number. Dwane should have that in the same file.
Cyrk,
If you are running hot, this will make you less hot.
The rad is about twice as thick as the stock rad. This unit has a trans cooler, but further cooling can be had by remoting the trans cooler. I looked and space is a real problem, so I had the trans cooler built in (As stock). I am adding a trans temp sensor to quantify just how hot the trans oil gets. If you can find a place for a remote cooler, you should make a BIG improvement for few bucks by keeping the stock rad. Since trans oil needs to be hot to work properly, a temp operated bypass is used on remote units to recirc oil until the temp comes up. Using the remote cooler inline with the stock cooler should put you somewher in between, but not needing a bypass.
Tone,
Install is less urgent in Oregon than SoCal, but I will get it done. Stock fan will not be used.
Roy
Reply With Quote