Latest pics as promised:

Here's the final CAD model before submitting to the machinist.


This is the foam mold machined in two halves at a time.



This is after the first vacuum-form over the prototype:


After all the excess flash material trimmed off to the profile line of the plate.


Preliminary mounting and test fit of the plate before the hitch installation.


Here's a pic of the plate painted in Black after the modifying a slot opening for the hitch clearance beforehand.


After the hitch installation, the rear plate is finished and mounted using the stock bottom screw mounts only.


A full rear view of the plate with the hitch combo.