Alright, we'er back!

So since we've been gone I've done a few things.

1. Replaced my nose on my SC, by the way they sent me a different type(I'll post pics soon)......and NO RATTLING!

2. Had a tough time with this kit and had to make some mods....

1. Cut the pipe shorter
2. Had to order new cuplings, 3.5/3" and 3/2.75"(little pricey $50 for the pair)
3. Moved the intake nipple up(welded aluminium(sp)...not me a shop did)
4. Bought another filter, 3.5 inlet size to fit onto the airfow sensor.

Here it is....



I did a test fit to make sure all is good and it's perfect, the filter ends up right infront of the hole where the outside air comes in from the airbox.
I'm going to bring it back to the shop so they can fit it in properly and make a braket to hold it up, also add a hole underneith for the sensor.

All said and done should look pretty sharp.

OH, all you SC owners still running a stock air box.....take out the airbox and put on a cone filter(3.5" inlet).......MAEGER DIFFERENCE! I'm happy with that alone, but I was already hip deep on this intake mod and decided to go all the way.

Tone- I found it on Ebay, search under carbon fiber intake. I got it for $65 delivered....and yes, very well built, real carbon fiber and light as a feather.