There are front speakers only, powered by a Tubedriver Blue 2150. No rears at all, except a JL 10W6 V2 d4 in a Decware Deathbox, powered by a Tubedriver 1250.

The front to rear split is usually set to 80Hz, if I'm playing a DVD, I usually bump the split up to 120Hz.

Headunit is a Clarion VR925 touchscreen, running TOSlink digital out to seperate D/A converter. Interconnects are a mix of StraightWire, and Alpha Core silver. Speaker wire is braided CAT5.

Yes, the tweets are not aimed directly at the ears, after mounting them in modeling clay, and adjusting them for a week or so I decided they sounded better off axis a little. The stock aiming is rediculous though, the drivers side fires right into the dash. The mids are aimed up and rearwards as much as I could. All the open portions of the inner door panel are sealed off as much as I could. Next planned upgrade will be hooking up an active crossover, and tri-amping the fronts to eliminate some of the phase shifts that the passive crossover causes.

Yes, the home system is much crazier.

I thought briefly about offering the pods for sale, but its just way too time intensive, and I'm basically lazy.

John