VX_PA's dilema


Have you checked the alarm manual?
downloads

Here's the "buzzer" mode info:

BUZZER OPERATION MODE

The factory setting for the buzzer mode is buzzer ON. Selecting the buzzer OFF mode only affects the buzzer operation during remote arming & disarming.

NOTE: Power loss to the system (e.g. due to a dead battery in the vehicle) has no effect on the operation of these or any other features.

To change the buzzer operation mode, follow the steps below:

1) Sit in the driver seat with all doors and the tailgate window closedl

2)Press and release the remote control's top button once to lock the doors, then once again to inlock the driver door only.

3) Open the driver door only.

4) Insert the key into the ignition switch, and turn it to "ON" (not "ACC) 5 times (LOCK > ON > OFF > ON > OFF > ON > OFF > ON > OFF > ON) within a 10 second period.

* The buzzer chirps once.
* THe vehicle's marker lights and parking lights flash once.
* THe status indicator LED will turn on for 30 seconds.

-YOU MUST PERFORM THE NEXT STEPS WITHIN 30 SECONDS-

5) Select the operating mode

BUZZER OFF
A) Close the driver door
B) Turn the ignition switch to the "OFF" position. *
* the buzzer chirps once.
* the marker lights and parking lights flash once.

BUZZER ON
A) Close the driver door, then open and close it again.
B) Turn the ignition switch to the "OFF" position *
* The buzzer chirps twice.
* The marker lights and parking lights flash twice.


* If you do not turn the ignition key to "OFF", or exceed 30 seconds during the programming steps, the status indicator LED will turn off, and the operation mode will remain unchanged.


Let us know if it works. It could be something else is wrong with your horn or electrical system.