Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17

Thread: how can I tell?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Nov 2003
    Location
    1999 black VX 1740
    Posts
    69
    Thanked: 0

    Question how can I tell?

    Ok, so say there is no record for work being done to the hood insert, headlight gasket or window binding problem (it's a 1999) Is there any way to tell by looking at it if any of those problems have been replaced/fixed?

  2. #2
    Member Since
    Feb 2003
    Location
    '76 IH Scout II Tubed, 40"s, locked, etc
    Posts
    1,090
    Thanked: 0

    ??????????

    ask yourself


    a) Is there a crack in hood insert or not???

    b) Is headlight gasket coming unglued or not???

    c) Is window binding or is it working properly????

    By asking yourself these simple questions and by physically looking at part/component in question and by answering these questions.......you can decide for yourself......wow!!! easy, huh?
    Last edited by SPAZZ : 11/23/2003 at 05:52 PM

  3. #3
    Member Since
    Nov 2003
    Location
    1999 black VX 1740
    Posts
    69
    Thanked: 0
    Ok so I guess it was a dumb question.

    I just thought maybe you had some advice on checking if it was fixed or if the replacement parts look different.

  4. #4

    Smile

    Hey Bagheera
    I guess you are not original owner of your VX.
    I don't think any replacement parts look different except newer.
    And If you have those problems, you can ask for replace/repair them again if your VX is still under warantee.
    Jkim
    01 black VX
    04 black V40 LSE

  5. #5
    Member Since
    Oct 2003
    Location
    99', Astral Silver, 0430
    Posts
    20
    Thanked: 0
    Factory body parts have factory ID stickers on them, replacments have a different sticker. All this info is in the manual. As for the window, or headlight you might be able to find some service records but its doubtful.

  6. #6
    Member Since
    Nov 2003
    Location
    1999 black VX 1740
    Posts
    69
    Thanked: 0
    Thanks for your help guys....



    ~Kiersten

  7. #7
    Member Since
    Jun 2002
    Location
    00 00 00
    Posts
    1,627
    Thanked: 0

    Re: ??????????

    Originally posted by SPAZZ
    ask yourself


    a) Is there a crack in hood insert or not???

    b) Is headlight gasket coming unglued or not???

    c) Is window binding or is it working properly????

    By asking yourself these simple questions and by physically looking at part/component in question and by answering these questions.......you can decide for yourself......wow!!! easy, huh?
    Any one of these things could happen whether the item has been replaced, reglued, or greased... this stuff is almost guaranteed!

  8. #8
    Member Since
    May 2003
    Location
    2000, white, IronMan, SUPERCHARGED, 0069
    Posts
    1,220
    Thanked: 0

    Post

    yeah...I think Isuzu replaces the entire headlight units in regards to the weatherstripping seal to simply get you through the warranty period until it happens again and you are stuck with it. I simply used some GE clear Silicon RTV on mine and they seem perfectly fine. I would rather do this every few years (if necessary) than risk screwdriver scratches on body and cladding by a mechanic in his
    effort to replace whole headlight units (that will, undoubtably, peel loose again!).

    So far...simply silicon spraying the window tracks every 4/6 weeks seems to be working in regards to the windows working correctly. If you notice the window speed slightly slowing down or the window starting to go up at a less than perfect angle than its time to respray. Once my warranty is up I may pursue Phine's window fix...but, for now Silicon seems to work nicely and is a cheap fix.

    I haven't had the hood insert problem. I'm assuming it is due to over-torquing at the factory?
    [SIGPIC][/SIGPIC]"If its fast and reliable, its not cheap;
    if its fast and cheap, its not reliable;
    if its cheap and reliable, its not fast."


    If love is blind, why is lingerie so popular?

  9. #9
    Member Since
    Jan 2003
    Location
    2001, IronMan White, #440
    Posts
    1,750
    Thanked: 0
    Here is a simple solution. Go to your local Isuzu dealer. Hopefully there is one nearby. Give the sevice tech guy your
    VIN # and ask him to check the service records for you. If any work has been done by an Isuzu Dealer, and it probably was because it was under warrenty, it will show up.

    Hope that helps.

    Peace
    Tomdietrying

    p.s.
    This is a board to help not belittle eachother. Peace to you Spazz.
    "Through Great Sacrifice..... Great Rewards Will Be Achieved"

  10. #10
    Member Since
    Sep 2002
    Location
    12 Mini Cooper Coupe S fully modded and tuned!, 01 Kaiser VX #1209 RIP, 01 Kaiser VX #0664 Clone
    Posts
    1,678
    Thanked: 1
    Not to be rude but I ditto Spazz! Common sense...
    Ask forgiveness, not permission.

  11. #11
    Member Since
    Nov 2003
    Location
    1999 black VX 1740
    Posts
    69
    Thanked: 0
    Thanks tomdietrying

    I will contact the Isuzu dealer & get them to run the VIN#...EXCELLENT idea

    ~Kiersten

  12. #12
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    799
    Thanked: 0
    As to the window question, I think the "official Isuzu fix" ( I bought a copy of an Isuzu service CD that shows this) may require drilling out and replacing the window regulator rivets, installing shims, and replacing rivets with nut and bolt. Can anyone that's had the Isuzu fix confirm this?

  13. #13
    SGT. BATGUANO,

    I would like to get a copy of that CD!
    dose it have a part #?
    Knowledge is power!

  14. #14
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    799
    Thanked: 0
    Got it off e-pay a couple months back. It's called Isuzu Technician Seminar 2002. It's a burned copy so no part # is shown on it.

  15. #15
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    799
    Thanked: 0
    Originally posted by totallto
    SGT. BATGUANO,

    I would like to get a copy of that CD!
    dose it have a part #?
    There is another one of these CDs on epay. I believe the seller is babydi

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails