StinkyFab Visit

[StinkBug]

Originally posted by Hotsauce
I do like the brushbar. Heres what I would see different.

1. The bar should clear the openings in the front bumper. Many members have additional lights already mounted in these slots. This also continues the line of the curve to the lower supports.

2. 2 lower pointed fangs to repeat the fanged theme of the gtill. They should be conical, slightly curved, and sharp.



John C.

There are some things about the bar that can be modified, and some that cannot. The lower tubes can be rotated to be more vertical, but because of the mounting location, and the skidplate location they really cant come any closer together. Also on the bends in the bar, again they can be bent at a wider point, but because of the radius of the bending die and limitations on how close the bends can be to each other either the center piece would have to be taller and the bends farther apart. Thanks for the input , lets keep it going and I'll see if we can get a design that would work well for most of you.

Dallas

edit: there will definitely be some light tabs on the production version.