I installed the W-2's with very impressive results and you can use existing wiring, and the bulbs won't melt the stock lense... By the way, its a $10 upgrade that is well worth it.

in fact, for $40 I had an awesome new look in the front with existing wiring:

Piaa 19171: replaces the horn light above the headlight (stock yellow)

Piaa 19224: replaces the fog (round) lights.

The above two installs take 10 minutes to complete

Sylvania SilverStar 9003ST replace the headlight- these take 20 minutes and require the removal of the battery and then the air intake (3 bolts) on the other side. I think it is called the intake, or filter box...

You can even replace the dome light inside your car with 19223 to have that uniform white look.... I am already getting tons of compliments, on top of what I already get, that is just nice.

Check out this post by Cyrk for more details:

If your looking for a brighter bulb you might try the piaa w2 replacment bulbs. I've posted this information is several other threads but here it is again...

http://www.vehicross.info/forums/sh...15&pagenumber=3

If you check out the thread above, you will find a pic I posted comparing the stock bulbs to my new ones.


quote:
--------------------------------------------------------------------------------

PIAA W2 - replaces parking lights, part number 19224
PIAA T-6 - replaces dome light, part number 19223

PIAA reference - http://www.piaa.com/Bulbs/Bulbs-Miniature.html
Place I bought them - http://www.lightningmotorsports.com/piaa_bulbs.htm

My head lights are the Sylvania SilverStar's 9003ST, I ended up just buying these at the local auto parts store. They had a buy 1 get 1 at 1/2 price so I jumped at it, saved about $9.00 and didn't have to pay shipping.

Sylvania Reference - http://www.sylvania.com/auto/silverstar.htm

--------------------------------------------------------------------------------