Results 1 to 2 of 2

Thread: keyless entry programming

  1. #1
    Member Since
    Jun 2010
    Location
    '01 Ironman VX, #0936
    Posts
    20
    Thanked: 0

    keyless entry programming

    I bought a replacement key fob for my '01. I'm looking for instructions on how to program it. After searching the forums I found a post that said look here " http://www.vehicross.info/modules.ph...ewarticle&id=7 " and got 404 not found.

    Anyone know the procedure to program the fob?

  2. #2
    Member Since
    Jun 2010
    Location
    '01 Ironman VX, #0936
    Posts
    20
    Thanked: 0
    Never mind. Further searching found this:

    i finally figured out how to program/add my new remote to my 01 vx. here's the steps i did.
    1. TURN THE IGNITION KEY ALL THE WAY TO ON (VERY IMPORTANT)
    2. depress and hold green button in the bottom of the alarm box
    3.press the arm/disarm/panic button on the remote your trying to program while still holding down green button
    4. and your done.
    it's very easy once you know how to do it.

    ronin

    FYI the alarm box is under the dash next to the fuse box.

    Remove the key, close the door, verify fob works.

    Chas

Similar Threads

  1. Keyless entry
    By Arconcut2@yahoo.com in forum VX Troubleshooting...
    Replies: 2
    Last Post: 05/03/2016, 08:35 PM
  2. VX Keyless Entry?
    By shinkson in forum VX Talk...
    Replies: 5
    Last Post: 03/19/2011, 09:35 AM
  3. Keyless entry programming
    By Rico_MD in forum VX Talk...
    Replies: 7
    Last Post: 01/19/2005, 04:03 PM
  4. keyless entry programming
    By kal-el in forum VX Troubleshooting...
    Replies: 7
    Last Post: 07/07/2004, 11:52 AM
  5. Keyless Remote Programming
    By RobVX in forum VX Troubleshooting...
    Replies: 5
    Last Post: 06/02/2004, 10:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails