I've done a swap before on a different vehicle. I'm comfortable with it...just mainly wanting to make sure things plug together the same.
I've done a swap before on a different vehicle. I'm comfortable with it...just mainly wanting to make sure things plug together the same.
I did this swap myself before when I had a US VX which was a 1999. The plug for the airbag didn't fit. I wanted to get male-female connectors from somewhere to change them so that they plug one into another but never got to doing it and later sold that US VX after getting two of JDM VXes. The horn/signal plug connects directly. I guess there must have been some different versions of airbags with different connections since MileHighVX said his connected and was plug and play. That wheel that I had on my US VX was sold, so I can't compare the connectors on the two wheels that I have now with that one where connectors didn't fit. But the wheel is easy to put on and if the connectors don't fit, you can find some other connectors to use, just cut them off (make sure sure you cut one wire at a time) and put on new connectors and be careful not to shorten them when taking off or putting new ones on. Shouldn't be too hard.