Found it but one Allen screw won't budge and the other isnt easily accessible so that I can remove the metal shield. Wth. Thanks
'Zoid
Found it but one Allen screw won't budge and the other isnt easily accessible so that I can remove the metal shield. Wth. Thanks
'Zoid
Not to mention that the vacuum port on the the new part is way smaller than the vacuum hose. Ugh
'Zoid
Nevermind. I'll just cut down the correct size Allen to fit.
Super VXer
That's been the route many have gone. IIRC, I just left that back bolt off when I was done.Originally Posted by dallas121469
Super VXer
Take a look at this thread: http://www.vehicross.info/showthread...ent?highlight=
An older member, Dino, did a very nice write-up on how to replace our FPR's. I used his tutorial the first time that I replaced my FPR and it worked like a charm.
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
-Douglas Adams, Mostly Harmless
CatFish (04/26/2017)
Posting Permissions
Reply With Quote