Results 1 to 2 of 2

Thread: Thoughts and Ideas on Underside Up-Armoring?

  1. #1
    Member Since
    Feb 2015
    Location
    1999 Ebony Black - 1423
    Posts
    25
    Thanked: 0

    Thoughts and Ideas on Underside Up-Armoring?

    EDIT 2:

    I found the third plate on Ebay - needs surface rust removal and re-paint. I'll probably re-fab the large front plate out of same gauge steel...so I guess this wanted item can be considered "closed" - thanks for looking!

    EDIT:

    So today I found two of the three Trooper skid plates - but I got 'em off a Rodeo - see the image below for explanation (not my image):



    The two I found were the "triangular" ones shown above - the ones to the top-left and center-right (with all the speed holes). I was not able to find the one to the immediate top-right. I'm still looking.

    My understanding (if anyone wants to correct me, chime in!) is that these just bolt right up; you don't need to do any mods? Is that correct? If not - not a big deal, just gotta drill some hole(s) - I just want to know what/where I'm dealing with here when I get round to install time! Thanks!

    So I'm probably going to use that front skid plate I have as a pattern to fab up something lighter weight, maybe from the same gauge steel as what's already used for the Trooper/Rodeo plates I have now. The front plate I have is really heavy; I'm not planning on rock-crawling my VX, I just want a little bit of extra protection from the trail.

    If anyone has any other thoughts - let me know!

    ---

    All - my VX is a work in progress - as I find time and money. Recently plowed a bit into her - but I plan to do some more. What I'd like to do is add some more armor on the bottom side to protect the expensive stuff. I already have a rear diff guard welded on (the one Rocky Road sells - I also have their lift kit and super-sliders installed). What I'm thinking is a few things:

    1) Trooper skid plates if I can find some somewhere
    2) DIY skid-plates made from road sign aluminum and 1/2" UHMW poly
    3) Some other custom skid plate system (I have a front plate that I got from Kat a while back - with that as a pattern, plus some plans I got from a member a while back - maybe I can work something?)

    I've also thought about a front diff armor fabbed using something bought (there's some sliders/shields made by WARN and Rancho that look like they might be able to work with some cuttin' and weldin').

    Other ideas I'm bangin' around in my head - a front receiver hitch (already have the Curt hitch installed), to be able to mount a portable winch and other fun things too - I'm thinking something might fit in a way to hide it behind the front plate area... Lights... Exhaust...

    Lemme know what you guys think!
    Last edited by cr0sh : 03/12/2017 at 11:54 PM Reason: Update!!!

  2. #2
    Member Since
    Mar 2012
    Location
    2001 Ebony #0254
    Posts
    353
    Thanked: 14
    I also pulled 2 skid plates off of a 95 Rodeo so those do work but am still short one too. I am getting a winch behind the bumper, roof rack and pre-runners made at a fab shop, I will ask them if that could make a simple skid plate to cover the area we are missing a skid plate for.

Similar Threads

  1. Hmmmm......ideas....ideas...
    By JAMAS in forum VX Talk...
    Replies: 8
    Last Post: 11/04/2009, 12:32 PM
  2. soot like stuff on the underside
    By IndianaVX in forum VX Troubleshooting...
    Replies: 2
    Last Post: 05/10/2006, 08:42 PM
  3. Thoughts on cladding...
    By UNEVEN THOUGHTS in forum VX Talk...
    Replies: 6
    Last Post: 07/27/2004, 05:50 PM
  4. help Please...noise from underside of VX
    By Deathbyarchitect in forum VX Talk...
    Replies: 3
    Last Post: 11/21/2003, 04:05 PM
  5. VX Thoughts
    By Joe_Black in forum VX Talk...
    Replies: 10
    Last Post: 09/30/2003, 12:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails